Newshot

US university team builds low-cost bioprinter that can stack about 100 layers of live-cell gel material

AI summary

According to Techspot, researchers from the University of Rochester and Cornell University have developed a low-cost bioprinter capable of stacking about 100 layers of gel material containing living cells, with the entire setup costing only about $450, compared with commercial bioprinters that typically cost over $100,000. Built on a standard Creality Ender 3 3D printer with the print head replaced by a syringe pump, the device prints into a special slurry of gelatin, agarose particles and calcium chloride, and the team has released the STL models and G-code on GitHub.

Translation(model translation, not the source's own text)

US University Team Builds Low-Cost Bioprinter Capable of Stacking About 100 Layers of Live-Cell Gel Material

IT Home, November 21 news: According to Techspot, a research team from the University of Rochester and Cornell University in the US has developed a low-cost bioprinter capable of continuously stacking about 100 layers of gel material containing living cells, with the entire setup costing only about 450 US dollars (IT Home note: approximately 3,011 yuan at current exchange rates). For reference, commercial bioprinters typically cost more than 100,000 US dollars (approximately 669,000 yuan at current exchange rates).

According to the introduction, bioprinters are similar in principle to ordinary 3D printers, except that what they extrude is not molten plastic but gel containing living cells. However, because such gels tend to sag under their own weight before setting, many DIY bioprinters previously could print structures of no more than 20 layers.

The new bioprinter developed by this research team is based on the common Creality Ender 3 3D printer, replacing the original print head with a syringe pump and using 3D-printed PETG plastic parts to secure the related components, after which the nozzle works in a special slurry made from tiny gelatin and agarose particles mixed with calcium chloride, giving each layer a certain strength so that more layers of material can be printed.

In experiments, the research team successfully stacked about 100 layers of gel material containing living cells, at a height of slightly less than 22 millimeters, roughly equivalent to the width of a coin. Although the overall size is not large, it is already enough to print hollow cylindrical/grid structures suitable for bacterial culture.

In addition, the researchers developed two slurries for different purposes. Among them, the gelatin slurry makes it easy to take out the finished product directly after printing; the agarose slurry is better suited to leaving the printed structure in place to serve as a culture environment.

At present, the research team has published the device's STL model files and G-code programs on GitHub. Because the entire system is modified from a standard Ender 3 printer, the research team invites other laboratories and 3D printing enthusiasts to draw on the corresponding design to lower the threshold for bioprinting technology.

Related Articles

  • Nintendo Acts Again: GitHub Removes 144 Switch Modchip Firmware Repositories
  • GitHub Launches New Git Storage Architecture: Internal Test Supports 5,000 Agents Collaborating Simultaneously on a Single Code Repository, Handling 7,200 Pushes per Second
  • Microsoft GitHub Vice President Open-Sources "GPU Task Manager" Tool, Making Graphics Card Usage Clear at a Glance
  • Intel Open-Source Font One Mono Version 1.5 Released, Adding Braille and Powerline Support
  • Glow Security: AI Agents Inadvertently Leak Corporate Sensitive Information, Over 13,000 Screenshots Placed in Public GitHub Repositories
  • Ruthless Even Against Its Own: Microsoft GitHub Bans Registration of New Accounts with Outlook and Hotmail Email Addresses

The translation is machine-generated and individual terms may be off. Nothing is rewritten or cut; the original is authoritative.

Published by IT之家
This site only summarises and aggregates; copyright stays with the original author. Headlines and summaries follow the source — where they differ, the original wins.
Read the original ↗