Newshot

RadixArk Ships DaisyRose-27B, a 27B Agentic Coding Model Trained With Reinforcement Learning Only

Summary

This week RadixArk released DaisyRose-27B , its first open-weight model. DaisyRose-27B is an agentic coding model from RadixArk, post-trained from Qwen3.8-27B with reinforcement learning (RL). The model card page states that it used RL only, with no SFT or distillation. It ships under Apache 2.0 as a drop-in replacement for the base model. The main result: Terminal Bench 4.1 pass@1 rises from 5.6 to 12.0. You can check the deployment options and specs here through our GPULeaderboard.com chrome extension . TL;DR Size: 27.8B dense parameters (0.46B vision encoder, 0.42B MTP head), 262,144-token context. Runs on: 1 GPU. BF16 is about 52 GB, FP8 about 29 GB, NVFP4 about 23 GB (Blackwell only). Listed targets: H200, B200, GB300, RTX PRO 6000, RTX 5090, DGX Spark. GGUF also available. Performance: Beats its Qwen3.8-27B base on all 7 reported benchmarks. Best: IFBench 82.4, the top score among the 9 models RadixArk compared. Worst: HLE (text only) 34.3, only +0.4 over the base and below Inkli…

Original text(via MarkTechPost)

This week RadixArk released DaisyRose-27B, its first open-weight model. DaisyRose-27B is an agentic coding model from RadixArk, post-trained from Qwen3.8-27B with reinforcement learning (RL). The model card page states that it used RL only, with no SFT or distillation. It ships under Apache 2.0 as a drop-in replacement for the base model. The main result: Terminal Bench 4.1 pass@1 rises from 5.6 to 12.0. You can check the deployment options and specs here through our GPULeaderboard.com chrome extension.

TL;DR

  • Size: 27.8B dense parameters (0.46B vision encoder, 0.42B MTP head), 262,144-token context.
  • Runs on: 1 GPU. BF16 is about 52 GB, FP8 about 29 GB, NVFP4 about 23 GB (Blackwell only). Listed targets: H200, B200, GB300, RTX PRO 6000, RTX 5090, DGX Spark. GGUF also available.
  • Performance: Beats its Qwen3.8-27B base on all 7 reported benchmarks.
  • Best: IFBench 82.4, the top score among the 9 models RadixArk compared.
  • Worst: HLE (text only) 34.3, only +0.4 over the base and below Inkling 2 Small’s 44.1.
  • Bottom line: Best: Terminal Bench 4.1 more than doubles after 18 days of RL. Worst: it still trails much larger MoE models on hard agentic tasks.

What is DaisyRose-27B?

DaisyRose-27B keeps the Qwen3.8-27B architecture unchanged. The model card lists 64 decoder layers in a 3:1 pattern. Three Gated DeltaNet linear-attention layers alternate with 1 full-attention layer. Hidden size is 5,120. A 27-layer vision encoder handles images. One multi-token-prediction layer supports speculative decoding. Input is text and images, output is text, and it is a thinking model.

How was DaisyRose-27B trained?

RadixArk built about 1,200 curated tasks with Eigent AI, chosen from thousands of candidates. Each task targets a specific failure of the base model. Each sandbox attempt allows up to 1.5 hours, 100+ tool calls and 256k+ output tokens. Agent sessions reach up to 1M tokens, per the blog.

Training ran on Miles, RadixArk’s open-source RL framework, in fully asynchronous mode. The run used 144 H200 GPUs for 18 days. Of those, 128 handled agent inference and 16 handled training. Total compute was 63,000 GPU-hours.

RadixArk reports 37% MFU on its internal backend. An open-source Megatron-based trainer reached 16%. End-to-end throughput was 16.8k tokens/s versus 8.3k, a 2.0x speedup. RadixArk says this cut GPU time by 57%.

Sandboxes ran on AgentENV. RadixArk reports about 944,000 sandboxes from mid-September to mid-November. Peak concurrency hit 1,566. Creation success was 99% over 9 weeks. RadixArk puts the cost about 80% below popular cloud sandbox providers.

How does DaisyRose-27B perform on benchmarks?

All scores are self-reported by RadixArk. DaisyRose scores are the higher of its BF16 and FP8 runs.

BenchmarkDaisyRose-27BQwen3.8-27BChange
Terminal Bench 4.1 (pass@1)12.05.6+6.4
Terminal Bench 2.175.573.0+2.5
DeepSWE v1.146.242.2+4.0
SWE Bench Pro v294.791.3+3.4
HLE (text only)34.333.9+0.4
IFBench82.479.5+2.9
GPQA Diamond90.789.2+1.5

Source: RadixArk blog and model card.

The largest jump is Terminal Bench 4.1, which more than doubles. Coding gains are steady: +4.0 on DeepSWE v1.1 and +3.4 on SWE Bench Pro v2. Knowledge gains are small, at +0.4 on HLE and +1.5 on GPQA Diamond.

Against larger models, results are mixed. MiMo V2.6 Flash (309B total) leads Terminal Bench 4.1 at 16.1. Inkling 2 Small (594B total) leads DeepSWE at 72.1 and HLE at 44.1. DaisyRose-27B tops RadixArk’s 9-model table only on IFBench.

How do you deploy DaisyRose-27B?

Weights are on Hugging Face in BF16, FP8, NVFP4 and GGUF. NVFP4 requires a Blackwell GPU. RadixArk recommends SGLang with DSpark speculative decoding. That setup uses the Qwen3.8-27B-DSpark draft model. vLLM also works via vllm serve "RadixArk/DaisyRose-27B". Suggested thinking-mode sampling is temperature 1.0, top_p 0.95 and top_k 20.

How does DaisyRose-27B compare with similar-size models?

MetricsDaisyRose-27BQwen3.8-27BMuse Glimmer-30BQwen3.6-35B-A3B
DeveloperRadixArkQwen (Alibaba)Meta Superintelligence LabQwen (Alibaba)
Total params27.8B27B~29.6B35B
Active params27.8B (dense)27B (dense)~29.6B (dense)3B (MoE)
Context262,144262,144 (extensible to 1M)131,072+262,144 (extensible to 1,010,000)
LicenseApache 2.0Apache 2.0Apache 2.0Apache 2.0
InputText, imageText, image, videoText, imageText, image
Hardware1 GPU; 52 GB BF16, 23 GB NVFP4Not disclosed64 GB full precision; under 20 GB 4-bitNot disclosed
Terminal Bench 2.1*75.573.051.744.9
SWE Bench Pro v2*94.791.380.473.3
DeepSWE v1.1*46.242.24.40.0
HLE (text only)*34.333.922.022.2
IFBench*82.479.577.064.4
GPQA Diamond*90.789.283.586.0
SWE-bench Pro (official card)Not disclosed61.751.249.5

*From RadixArk’s comparison table, which cites each developer’s reports or leaderboards. SWE Bench Pro v2 figures trace to arXiv 2611.16289. The last row comes from each model’s own card.

Key Takeaways

  • RL only, no SFT: 1,200 tasks, 18 days, 144 H200s.
  • Terminal Bench 4.1 jumps from 5.6 to 12.0.
  • Fits 1 GPU: 52 GB in BF16, 23 GB in NVFP4.
  • Miles hit 37% MFU, 2.0x faster end to end.
  • Apache 2.0, but every score is self-reported.

Check out the model card, the technical blog and the Miles repo. You can check the deployment options and specs here through our GPULeaderboard.com chrome extension.

Also, feel free to follow us on Twitter and don’t forget to join our 150k+ML SubReddit and Subscribe to our Newsletter. Wait! are you on telegram? now you can join us on telegram as well.

Need to partner with us for promoting your GitHub Repo OR Hugging Face Page OR Product Release OR Webinar etc.? Connect with us

Asif Razzaq is the CEO of Marktechpost AI Media Inc.. As a visionary entrepreneur and engineer, Asif is committed to harnessing the potential of Artificial Intelligence for social good. His most recent endeavor is the launch of an Artificial Intelligence Media Platform, Marktechpost, which stands out for its in-depth coverage of machine learning and deep learning news that is both technically sound and easily understandable by a wide audience. The platform boasts of over 2 million monthly views, illustrating its popularity among audiences.

  • Asif RazzaqNVIDIA AI Releases Nemotron-Labs-Sigma, a Continuous Diffusion Language Model with 14 checkpoints at 3B/8B
  • Asif Razzaq13 Best Agent Gateways in 2026 for MCP, A2A and LLM Traffic: Kong, Bifrost, AgentCore, Arcade
  • Asif RazzaqNot If, But How: Responding to Security Incidents in the Age of AI Attackers
  • Asif RazzaqGoogle DeepMind Releases Gemini 4 Neon: 1M Context, #1 on AA Coding Agent Index

The text above was extracted automatically from the source page and may miss images, tables or code blocks. The original is authoritative.

Published by MarkTechPost
This site only summarises and aggregates; copyright stays with the original author. Headlines and summaries follow the source — where they differ, the original wins.
Read the original ↗