Article title: Cuktech 10 Ultra Confirmed to Have a Risk of Damaging Low-Voltage Devices; Fix Firmware Has Been Pushed via OTA
Cuktech 10 Ultra Confirmed to Have a Risk of Damaging Low-Voltage Devices; Fix Firmware Has Been Pushed via OTA
IT Home, November 19 — Cuktech has responded to the safety hazard reported for the 10 Ultra charger (model AD1204U).
Cuktech confirmed that, with an extremely low probability, the product may experience a protocol chip non-response issue, which can cause abnormal voltage output and damage when charging low-voltage devices such as earphones, keyboards, and mice. The relevant fix firmware was pushed via OTA on November 18.

The publicization of this issue stemmed from a concentration of user feedback that recently appeared on social platforms. User 小红书 reported that their 10 Ultra had successively burned out the power chip of an iPhone 16 Pro and a Switch 2, and the related post reached interaction levels in the hundreds of thousands.
Multiple other users reported that after being powered on for a long time, the charger would display a frozen power reading, with no output from the port but the voltage not dropping to zero. If a device that does not support high voltage is connected at this time, there is a risk of it being burned out. Discussions on forums such as NGA trace back to an earlier point in time, with some users believing that similar failures had already appeared sporadically by the end of 2024.

Blogger "Chaping Jun" last night cited industry sources as saying that the root cause of the failure points to a firmware bug in the MCU (microcontroller) inside the charger, and that failure cases can be traced back as early as January 2026; another manufacturer's charger uses the same MCU and also has a probability of similar failures, but as of now no user damage reports have been received for that manufacturer's products.
In response to "Chaping Jun," Cuktech officially stated that the first confirmed user damage case occurred in June 2026, not January. Because the initial feedback sample was very small, the project team could not effectively reproduce the failure, and only recently succeeded in locating the problem logic, which objectively delayed the progress of the firmware fix. For users whose losses have been verified, Cuktech has completed identification and compensation through the full after-sales process; however, given the large number of device damage compensation claims that have recently appeared online, the company needs to identify each submitted device one by one to confirm the causal relationship between the damage and the charger failure.

Under normal circumstances, after being powered on, the charger needs to perform a "handshake" negotiation with the connected device, matching the power supply according to the output voltage requested by the device (for example, 5V for earphones and mostly 9V for phones). When the protocol chip is stuck in a non-response state due to the firmware defect, the port may maintain a maximum 20V output without negotiation, and once a low-voltage device is connected, it faces the risk of overvoltage damage.
Cuktech emphasized that devices with a conventional withstand voltage of 20V and above (such as phones and laptops) are not affected by this bug and have no risk of device damage. The official recommendation is that users connect the charger via Bluetooth through the Mi Home App as soon as possible and upgrade the firmware to the fixed version; if any abnormality is encountered during use, they can contact the after-sales customer service of the purchase channel for handling.

Related Articles
- Cuktech 10 / 15 Power Station third-round OTA gradually rolling out, adding power interface theme switching, recognition of iPhone 18/Duo, etc.
- Cuktech 30 laptop adapter listed: built-in active air cooling, can provide 360W output for gaming laptops, 499 yuan
- Cuktech launches CP Module Fan Plus "clip-on extension cable set": base supports both clip / stand use, 109 yuan
- Just stare at the screen when bored: Cuktech 10 Power Station "All-Seeing Screen Set" 218 yuan, new official low
- Cuktech launches CP Apple adapter C to L: comes with silicone cable sleeve, MFi certified, 69 yuan
- Cuktech Power Bank 600 opens reservations: can charge 7 devices at the same time, first-launch price 1299 yuan