Newshot

Thermal Grizzly launches PC DIY tool TG PadMate for measuring thermal pad thickness

AI summary

Thermal Grizzly released the TG PadMate on the 15th of this month, a tool for measuring the thickness of hardware's original thermal pads so users can choose the most suitable replacement material. Made of flexible plastic, it applies almost no pressure to the pad during measurement to avoid result deviation from deformation; it has a range of 0.5–5.0mm, covering the thickness range of thermal pads commonly used on graphics cards, with 0.5mm steps and 0.3mm tolerance. The TG PadMate itself is priced at €2.9 / $3.39, and Thermal Grizzly also offers a bundle including Minus Pad thermal pads.

Translation(model translation, not the source's own text)

Thermal Grizzly Launches PC DIY Tool TG PadMate for Measuring Thermal Pad Thickness

IT Home, November 18 news: The various circuit components on a computer PCB typically have different heights, while the bottom of a heatsink is usually a flat surface. This means the thermal material between them must be of the appropriate thickness. Too thin may leave air gaps, seriously affecting cooling performance; too thick may create stress and cause physical damage.

Facing this problem, Thermal Grizzly launched the TG PadMate on the 15th of this month local time. The tool can be used to measure the thickness of hardware's original thermal pads, helping users choose the most suitable replacement consumables.

IT Home has learned that the TG PadMate is made of flexible plastic and applies almost no pressure to the thermal pad during measurement, avoiding result deviations caused by deformation. Its measurement range is 0.5~5.0mm, covering the thickness range of thermal pads commonly used in graphics cards; the result step is 0.5mm with a tolerance of 0.3mm.

The TG PadMate itself is priced at 2.9 euros / 3.39 US dollars (IT Home note: approximately 21.3 / 22.6 RMB at current exchange rates), and Thermal Grizzly also offers a bundle including Minus Pad thermal pads.

Related Articles

  • Phanteks teases three-way collaboration with Thermal Grizzly and Seasonic: centered on the EX6 ULTRA case, to be revealed on December 10
  • Thermal Grizzly releases PhaseSheet PTM Pro: stronger thermal conductivity, easier installation
  • Thermal Grizzly launches TG x CENS LN2 Container liquid nitrogen pot: developed with overclocking experts, suitable for graphics cards
  • Thermal Grizzly and Noctua launch 12V-2×6 monitoring device WireView Pro II Noctua Edition: stronger cooling, quieter experience
  • Thermal Grizzly launches stainless steel version of Mycro Pro processor custom loop water block, Intel version supports LGA1954
  • Stronger thermal conductivity: Thermal Grizzly launches Duronaut Pro and Hydronaut Pro thermal paste

The translation is machine-generated and individual terms may be off. Nothing is rewritten or cut; the original is authoritative.

Published by IT之家
This site only summarises and aggregates; copyright stays with the original author. Headlines and summaries follow the source — where they differ, the original wins.
Read the original ↗