Newshot

Stroh Violin Talkbox

Summary

Something like five people sent me this video of Alexander Lozyakov playing a Stroh violin talkbox , with the sound going into a tube in his mouth: Thanks everyone! As someone who likes both talkboxes and Stroh violins , and making acoustic instruments into talkboxes , this is right at the intersection of my interests! In fact, I almost made one a few years ago, modifying my Stroh to connect to a tube: I sketched up what I'd need for the adapter, where I'd take off the horn, screw this on instead, and then push the hose into the hole: Note: this says 13mm, probably because of the tubing I had at the time, but I think it should actually be 19mm to match the tubing used for my MXR talkbox . But then this wasn't something I knew how to make, my effort to convince my bagpipe-maker cousin to build one on a lathe fell through, and I forgot about it. But seeing this video got me thinking about picking this back up; maybe I could get an adapter 3d printed? I asked Claude to make me one, took s…

Original text(via LessWrong)

Something like five people sent me this video of Alexander Lozyakov playing a Stroh violin talkbox, with the sound going into a tube in his mouth:

Thanks everyone! As someone who likes both talkboxes and Stroh violins, and making acoustic instruments into talkboxes, this is right at the intersection of my interests!

In fact, I almost made one a few years ago, modifying my Stroh to connect to a tube:

I sketched up what I'd need for the adapter, where I'd take off the horn, screw this on instead, and then push the hose into the hole:

Note: this says 13mm, probably because of the tubing I had at the time, but I think it should actually be 19mm to match the tubing used for my MXR talkbox.

But then this wasn't something I knew how to make, my effort to convince my bagpipe-maker cousin to build one on a lathe fell through, and I forgot about it. But seeing this video got me thinking about picking this back up; maybe I could get an adapter 3d printed?

I asked Claude to make me one, took some measurements with calipers, and got a funnel-shaped adapter design (STL):

Harris has a 3D printer, and generously printed it up as ~21g of PETG:

It didn't go on perfectly, because it turns out that the screw holes on the instrument are not exactly evenly spaced, but it was close enough and the design had enough extra plastic that after removing ~1mm from two different holes it would go right on:

Unfortunately it's a lot less "talkboxy" than I was hoping. The problem is that the resonating diaphragm is exposed, like open-back headphones, and so we hear a lot of the sound directly instead of almost all of it passing through my mouth. Possibly I could build some kind of insulating cover, but that sounds like a lot of work! For now I'm interested in other things.

Comment via: facebook, mastodon

The text above was extracted automatically from the source page and may miss images, tables or code blocks. The original is authoritative.

Published by LessWrong
This site only summarises and aggregates; copyright stays with the original author. Headlines and summaries follow the source — where they differ, the original wins.
Read the original ↗