Summary
arXiv:2611.20587v1 Announce Type: new Abstract: Since the late 19th century when the first walking toys were developed, it has been known that mechanical stoppers at the hip joint are crucial for generating stable passive dynamic walking. Recent research on passive-dynamic and limit-cycle walkers has also confirmed that mechanical stoppers at the hip and knee joints are effective for generating stable walking motion, but theoretical research on how this mechanical constraint enhances the overall gait stability remains insufficient. This paper introduces a planar X-shaped walker equipped with mechanical stoppers at the hip joint, and investigates the effect of the mechanical constraint on the stability of the wheel gait generated by constant torque drive on a downslope. By simply falling forward while using the stoppers to constrain itself to the target impact posture, the robot can generate a highly stable wheel gait. We divide the motion of one step into four phases, derive approximat…
Original text(via arXiv cs.RO)
Computer Science > Robotics
Title:Stability Principle Inherent in Wheel Gait of Planar X-shaped Walker Generated Using Constant Torque Drive and Mechanical Stoppers
Abstract:Since the late 19th century when the first walking toys were developed, it has been known that mechanical stoppers at the hip joint are crucial for generating stable passive dynamic walking. Recent research on passive-dynamic and limit-cycle walkers has also confirmed that mechanical stoppers at the hip and knee joints are effective for generating stable walking motion, but theoretical research on how this mechanical constraint enhances the overall gait stability remains insufficient. This paper introduces a planar X-shaped walker equipped with mechanical stoppers at the hip joint, and investigates the effect of the mechanical constraint on the stability of the wheel gait generated by constant torque drive on a downslope. By simply falling forward while using the stoppers to constrain itself to the target impact posture, the robot can generate a highly stable wheel gait. We divide the motion of one step into four phases, derive approximate analytical solutions for the state error transition function matrix in each phase using a linearized model, and analyze the increase or decrease in the state error norm using metrics such as its maximum singular value. Numerical simulations demonstrate that while two phases are unstable in terms of the increase in the state error norm, the remaining two phases are stable, resulting in overall asymptotic stability.
| Comments: | 8 pages, 6 figures. Published in the Proceedings of IEEE ICRA 2026. This author version corrects the author names in one reference; the scientific content remains unchanged |
|---|
| Subjects: | Robotics (cs.RO) |
| Cite as: | arXiv:2611.20587 [cs.RO] |
| (or arXiv:2611.20587v1 [cs.RO] for this version) |
| https://doi.org/10.48550/arXiv.2611.20587 arXiv-issued DOI via DataCite (pending registration) |
| Journal reference: | 2026 IEEE International Conference on Robotics and Automation (ICRA), pp. 11226-11233, 2026 |
| Related DOI : | https://doi.org/10.1109/ICRA57385.2026.11696950 DOI(s) linking to related resources |
Submission history
The text above was extracted automatically from the source page and may miss images, tables or code blocks. The original is authoritative.
Published by arXiv cs.RO
This site only summarises and aggregates; copyright stays with the original author. Headlines and summaries follow the source — where they differ, the original wins.
Read the original ↗