Newshot

Speeding Up Starship Reuse: 马斯克 Responds to "Chopsticks" Arm Abrading the Rocket, Will Switch to Stainless Steel Wool

AI summary

IT Home, November 18: After SpaceX first caught the returning Starship from space with the "chopsticks" arm on the launch tower, 马斯克 said that in the future the ablative heat-shielding material scraped off on contact with the arm will be replaced with more friction-resistant, reusable stainless steel wool, thereby reducing refurbishment time and advancing rapid Starship reuse. According to previously released SpaceX recovery footage, during the "chopsticks catching the rocket" process, the black ablative heat shield on the side of the spacecraft showed obvious scraping and shedding when it came into contact with the robotic arm. IT Home includes the relevant images below: 马斯克 subsequently responded on social media that on future flights, this part of the material will be replaced by "stainless steel wool." The "stainless steel wool" here is an engineered metal fiber insulation material that, like a fiber layer, traps air in the gaps between fibers, thereby reducing heat conduction. Unlike existing materials that gradually ablate and wear away during atmospheric reentry, stainless steel wool in theory will not be consumed like a "sacrificial layer," so it is expected to withstand mu

Translation(model translation, not the source's own text)

Accelerating Starship reuse: 马斯克 responds that “chopsticks” gripping the rocket cause too much wear, will switch to stainless steel wool in the future

IT之家, November 18: After SpaceX first used the launch tower’s “chopsticks” robotic arms to catch the “Starship” returning from space, 马斯克 said that in the future, the ablative thermal insulation material scraped off during contact with the robotic arms will be replaced with more abrasion-resistant, reusable stainless steel wool, thereby reducing refurbishment time and advancing rapid Starship reuse.

According to recovery footage previously released by SpaceX, during the “chopsticks gripping the rocket” process, the black ablative thermal insulation layer on the side of the spacecraft showed obvious scraping and peeling when in contact with the robotic arms. IT之家 attaches the relevant image below:

马斯克 subsequently responded on social media that in future flights, this part of the material will be replaced by “stainless steel wool.” Here, “stainless steel wool” is an engineered metal fiber insulation material; it can both trap air in the gaps between fibers like a fiber layer, thereby reducing heat conduction.

Unlike existing materials that gradually ablate and wear away during atmospheric reentry, stainless steel wool theoretically will not be consumed like a “sacrificial layer,” so it is expected to withstand multiple reentries and robotic-arm gripping, reducing inspection, repair, and replacement work after each flight.

Related articles

  • 马斯克 reveals SpaceX Starship V4 details: length increased by 40%, propellant payload increased by more than 60%
  • 马斯克 shares close-up photo of SpaceX Starship “chopsticks gripping” the spacecraft: “I hugged it”
  • 马斯克 says: SpaceX’s “chopsticks catching rocket” will next month attempt dual recovery of Starship / booster for the first time
  • 马斯克 SpaceX Starship’s 14th test flight scheduled for September 22, first push toward Earth orbit
  • 马斯克: SpaceX Starship targets more than 30 launches per day in 2030
  • Starship’s 13th test flight upper stage remained intact after splashdown, but 马斯克 said the recovery situation is not optimistic

The translation is machine-generated and individual terms may be off. Nothing is rewritten or cut; the original is authoritative.

Published by IT之家
This site only summarises and aggregates; copyright stays with the original author. Headlines and summaries follow the source — where they differ, the original wins.
Read the original ↗